Materials You Can Trust
Our Materials
Welding Wires 3D print Large Parts
MX3D’s Tech is based on welding science. We work with a wide range of weldable metals and alloys. This ranges from stainless steels, duplex, Inconel, to aluminum, bronze, and corten alloys. In short, most weldable materials can be processed with our WAAM technology. Below is a list of commonly used materials. If you would like to inquire about other materials, please reach out to us.
Our Alloy Range & Material Expertise
Aluminum
- 2319: EN ISO 18273: S AI 2319 (AlCu6MnZrTi)
- 5356: EN ISO 18273: S Al 5356 (AlMg5Cr(A))
- 5183: EN ISO 18273: S Al 5183 (AlMg4,5Mn0,7(A))
- 4018: EN ISO 18273: S AI 4018 (AISi7Mg)
- 4046: EN ISO 18273: S AI 4046 (AISi10Mg)
- 6063: EN ISO 18273: S AI 6063 (AlMg0.7Si)
Bronze & Copper
- CuSn6: EN ISO 24373: Cu 5180A
- CuSi3 : EN ISO 24373: S Cu 6560
- CuAl8: EN ISO 24373: S Cu 6100
- CuAl8Ni6: EN ISO 24373: S Cu 6328
- CuNi 70/30
Stainless Steel
- 308LSi: EN ISO 14343 – A: 19.9LSi
- 316LSi: EN ISO 14343 – A: 19.12.3LSi
- Duplex 2209 and 2205
- Superduplex 2594
- Matersitic 410NiMo
- Precipitation hardening 17-4PH
Steel
Mild steel
ER70S-6: EN ISO 14341-A: G 46 4 M G4Si1
ER80S-D2: EN ISO 14341-A: G 50 7 M 21 4Mo (higher strength/low-alloy)
ER80S-Ni1: EN ISO 14341-A: G 50 6 M 21 3Ni1 (improved low-temp toughness)
ER80S-Ni2: EN ISO 14341-A: G 50 7 M 21 2Ni2 (Ni alloyed)
High-strength steel
- NiMo: EN ISO 16834-A: G Mn3Ni1Mo
- NiCrMo: EN ISO 16834-A: G Mn3Ni1CrMo
ER100S-G: AWS A5.28 – EN ISO 16834-A: G 62 4 M13 Mn3NiCrMo
ER110S-G: AWS A5.28 – EN ISO 16834-A: G 69 4 M21 Mn3Ni1CrMo
ER120S-G: AWS A5.28 – EN ISO 16834-A: G 89 4 M21 Mn4Ni2CrMo
Other steel alloys
- Maraging Steels
- Tool Steels Fe3 and Fe8
Benefits of Wire
Most materials supplied as a wire for arc welding are compatible with WAAM. This gives WAAM access to one of the broadest ranges of materials for metal AM on the market. Moreover, compared to metal powders, weldable wires are more affordable, accessible, and available worldwide in general.
Within MetalXL, you are in the lead regarding material development and are able to build new strategies for your specialty wire and expand on existing ones when your standard or geometry requires this.
Outside of the range of materials presented, we also print with other materials.
Other alloys
- Inconel 625 and 718
- Other materials on request
Key industry standards & qualifying partners
Certifications & Industry Standards
Value Adding Standards
Our range of certifications and industry standards is continuously expanding. We have been successfully audited for the Lloyds AM facility Certification, API20S by Fieldnode, ISO9001 by DNV, and actively pursue new qualifications. As new applications demand specific qualifications, we ensure our technology is compatible & compliant and our QMS stays up to date. This way, MX3D ensures that every new partnership, system, and production challenge can meet the right standard. Our team of IWE, international welding engineers, is ready to help you qualify your project.
Featured
Materials & Standards in Action
Curious how our materials and industry standards work in practice? Explore our cases and see MX3D’s certified WAAM technology in action across critical industries.
Kevin
Get in touch
Do you have a question about materials or qualifying projects? We are up to the challenge. Please reach out to Kevin or send us an email through our contact form.
Kevin Affari
WAAM Expert
Why This Matters
Flexibility
Print in commonly used industrial alloys, tailored to your supply chain
Reliability
Confidence that parts will meet or exceed forged/ cast benchmarks
Authority
Certified, traceable, and ready for mission-critical applications
